A bunny ear drawstring bag is an adorable and functional accessory perfect for kids and adults alike. It’s great for carrying small items, gift packaging, or simply adding a playful touch to your everyday outfit. Handmade bags like this also make thoughtful gifts that show your creativity and care.
In this detailed tutorial, I'll guide you through every step of sewing your own bunny ear drawstring bag. The project combines basic sewing techniques with charming details like cute bunny ears and an easy-to-use drawstring closure.
Key Takeaways
- The project combines basic sewing with creative details like bunny ears and drawstring closure.
- Leaving specific openings in seams allows for threading drawstrings easily.
- Turning fabric right side out through a lining opening ensures clean edges and hides raw seams.
- Securing bunny ears with additional stitching adds durability and neatness.
- The finished bag is cute, practical, and customizable with different fabrics and cords.
Materials Needed
- Fabric with bunny ears – 2 pieces
- Fabric for the bag body – 2 piece
- Drawstring cord or ribbon
- Sewing machine
- Pins or clips
- Fabric marker or chalk
- Scissors
- Iron
How to Sew a Bunny Ear Drawstring Bag
Step 1: Cut Fabric Pieces According to Pattern
Start by cutting all your fabric pieces based on the bunny ear drawstring bag pattern.
- Cut one outer fabric piece with attached bunny ears.
- Cut one lining fabric piece with attached bunny ears.
- Cut one outer fabric piece for the main bag body.
- Cut one lining fabric piece for the bag body.
Make sure all pieces are accurate and neatly cut for best results.
Step 2: Sew Outer and Lining Bag Bodies Separately
Take the two outer fabric pieces and place them right sides together.
At 2 cm down from the top edge (not including seam allowance), draw a straight line across the width of the bag. This line marks where you will sew later to create the opening for the drawstring.
- Important: Leave a 2 cm section at this top edge unstitched on both sides. This opening is where the drawstring will thread through.
Sew along the bottom edge and side seams of the outer fabric, carefully turning corners by lifting the presser foot and rotating the fabric to keep seams neat.
Repeat this process with the lining pieces, but leave a small opening at the bottom seam unstitched so you can turn the bag right side out later.
Step 3: Attach Bunny Ears by Sewing Top Edges
With your sewn outer and lining pieces ready, fold the bunny ears downward so they align perfectly, right sides together.
Sew across the top edge following the line you drew from the top earlier.
After sewing, open up the ears and align outer fabric ears with lining ears carefully.
On each side of the ears, mark 2 cm openings where you will leave gaps for threading the drawstring.
Sew along the edges of the ears, stopping at the marked openings. Trim excess fabric near seams carefully without cutting into stitches to reduce bulk.
Step 4: Turn Bag Right Side Out and Finish Lining Opening
From the small opening left in the lining, turn your entire bag right side out.
Pull out and shape the bunny ears neatly.
Hand stitch or machine stitch closed the lining opening invisibly using a ladder stitch or a tight seam.
Step 5: Insert Drawstring
Fold each bunny ear downward towards the bag body.
Mark a straight line parallel to each ear’s base about 1–2 cm down from where it attaches to the bag body.
Sew along these lines on both sides, creating a crisp edge and strengthening the structure.
Thread your drawstring cord or ribbon through the openings left at the top edges on both sides of the bag.
Adjust tightness as desired and tie knots or add decorative beads at ends if preferred.
Frequently Asked Questions (FAQ)
Can I use fleece or knit fabric for this bag?
Yes, but be mindful that stretchy fabrics may require adjustments in seam allowances and may be trickier to sew precisely.
How long should my drawstring be?
Typically, 1.5 times the circumference of your bag’s top opening works well to allow comfortable pulling and tying.
Can I add pockets inside the bag?
Absolutely! Sew small pockets onto the lining pieces before assembly for added functionality.
How do I clean my handmade drawstring bag?
Hand wash in cold water or machine wash on gentle cycle depending on fabric choice. Air dry to prevent shrinkage.
Can I make larger or smaller versions?
Yes! Adjust pattern dimensions proportionally to create bags of different sizes suitable for various uses.
Final Thoughts
Making a bunny ear drawstring bag is a delightful project that blends functionality with whimsy. The process encourages creativity while developing sewing skills that can be applied to many other projects. Whether used as a gift bag, toy holder, or everyday accessory, your handmade drawstring bag will surely bring smiles wherever it goes.
Enjoy sewing your adorable bunny ear drawstring bag!
0 comments